Skip to main content

Energy Level Diagram of Insulator, conductor and Semiconductor


Insulators, Conductors and Semiconductors

Insulator
Insulators have no conductivity because of there is no conductivity electrons. Because of there energy gap between valance band and conduction band (5eV)
                                                       


Conductors
Conductors is high conductivity material. because of there no energy gap between valance band and conduction band.




Semiconductors
In semiconductors small energy gap between valance band and conduction band. The conductivity of semiconductors lies between Conductors and Insulators. When the temperature is low, semiconductors behaves like a insulator, When increase the temperature more and more semiconductors behaves like a conductor.


Labels:

Comments

Post a Comment

Popular Post

Miller Crystal Oscillator

Miller Crystal Oscillator Miller Crystal Oscillator Similar to modifications in Colpitt's oscillator, the Hartley oscillator circuit can be modified, to get Miller crystal Oscillator In Hartley oscillator circuit, two inductors and one capacitor is required in the tank circuit. One inductor is replaced by the crystal which acts as an inductor for the frequencies slightly greater then the series resonant frequency. The tuned circuit of L1 and C is offtuned to behave as an inductor i.e. L1. The crystal behaves as other inductance L2 between base and ground. the Internal capacitance of the transistor acts as a capacitor required to fullfill the elements of the tank circuit The crystal decides the operating frequency of the oscillator.
Post a Comment
Read more

Electronic oscillator division types and use

Electronic oscillator division types and use Electronic oscillator division types and use Introduction to oscillator An oscillator is a amplifier and it is a close loop circuit or network. It uses the Positive feedback. It is not require the externel signel and generate the a desired frequency A oscillatpr acts like generator, It oscillates the constant amplitude and frequency. Oscillator can generate the frequency upto gigahertz. Classification of the Oscillators Oscillators are classified based on the type of waveforms generate from the oscillator, range, frequency, parameters used. Based on Output waveforms. Based on circuit components. Range of operating frequency. Based on feedback uses or not uses Types of oscillatprs LC Oscillator Har...
Post a Comment
Read more